⚠️ Note:
Due to the large number of functionally multiplexing pins, you should check the BIOS functionality documentation before starting your design. Do not design directly from the pin definition documentation here.

eDP

I-PEX 20455-040E

Number	Name	Type	Description	Note
1	NC
2	GND
3	DDIA_TX3-	O	Lane 3 (-)
4	DDIA_TX3+	O	Lane 3 (+)
5	GND
6	DDIA_TX2-	O	Lane 2 (-)
7	DDIA_TX2+	O	Lane 2 (+)
8	GND
9	DDIA_TX1-	O	Lane 1 (-)
10	DDIA_TX1+	O	Lane 1 (+)
11	GND
12	DDIA_TX0-	O	Lane 0 (-)
13	DDIA_TX0+	O	Lane 0 (+)
14	GND
15	DDIA_AUX+	O	Auxiliary channel (+)
16	DDIA_AUX-	O	Auxiliary channel (-)
17	GND
18	LCD_VCC		LCD Power Supplies
19	LCD_VCC		LCD Power Supplies
20	LCD_VCC		LCD Power Supplies
21	LCD_VCC		LCD Power Supplies
22	Selftest	O	Default Grounding
23	GND
24	GND
25	GND
26	GND
27	HPD	I	Plug Detection	SoC GPP_E14
28	GND
29	GND
30	GND
31	GND
32	BL_EN	O	Backlight enable	SoC eDP_BKLTEN
33	BL_PWM	O	Backlight PWM dimming	SoC eDP_BKLTCTL
34	NC
35	NC
36	BL_PWR		Backlight Power Supplies
37	BL_PWR		Backlight Power Supplies
38	BL_PWR		Backlight Power Supplies
39	BL_PWR		Backlight Power Supplies
40	NC

LCD_VCC: +3.3V
BL_PWR: Same as LattePanda Mu input voltage
Selftest: Factory test pin, ground by default

Touch

Clamshell 6P 0.5mm FFC/FPC Connector

Number	Name	Type	Description	Note
1	I2C0_SCL	O	I2C Bus	SoC GPP_H5
2	I2C0_SDA	I/O	I2C Bus	SoC GPP_H4
3	GND
4	TOUCH_RST#	O	Touch panel reset	SoC GPP_E13
5	TOUCH_INT	I	Touch event interrupt	SoC GPP_E17
6	+3.3V		Touch panel power

MIPI CSI-2

Clamshell 22P 0.5mm FFC/FPC Connector

Number	Name	Type	Description	Note
1	GND
2	CSI_B_D0-	I	MIPI Data Lane 0
3	CSI_B_D0+	I	MIPI Data Lane 0
4	GND
5	CSI_B_D1-	I	MIPI Data Lane 1
6	CSI_B_D1+	I	MIPI Data Lane 1
7	GND
8	CSI_B_CK-	I	MIPI Clock
9	CSI_B_CK+	I	MIPI Clock
10	GND
11	CSI_B_D2-	I	MIPI Data Lane 2
12	CSI_B_D2+	I	MIPI Data Lane 2
13	GND
14	CSI_B_D3-	I	MIPI Data Lane 3
15	CSI_B_D3+	I	MIPI Data Lane 3
16	GND
17	CAM_RST	O	Camera reset	SoC GPP_A21
18	CAM_MCLK	O	Camera main clock	SoC GPP_D4
19	GND
20	I2C1_SCL	O	I2C bus	SoC GPP_H7
21	I2C1_SDA	I/O	I2C bus	SoC GPP_H6
22	+3.3V		Camera power

eSPI Contacts

2.54mm Pitch Contacts

Name	PIN	PIN	Name
ESPI_IO0	9	10	GND
ESPI_IO1	7	8	NC
ESPI_IO2	5	6	ESPI_RESET#
ESPI_IO3	3	4	ESPI_CS0#
ESPI_CLK	1	2	+1.8V

Contacts on eSPI bus for SoC to communicate with SuperIO, can be used to connect diagnostic card (untested).

SODIMM

DDR4 SODIMM pin table is too long, so I put it in a separate csv file.