5.0 KiB
5.0 KiB
Pinouts
All pin definitions for LattePanda Mu
⚠️ Note:
Due to the large number of functionally multiplexing pins, you should check the BIOS functionality documentation before starting your design. Do not design directly from the pin definition documentation here.
eDP
I-PEX 20455-040E
| Number | Name | Type | Description |
|---|---|---|---|
| 1 | NC | ||
| 2 | GND | ||
| 3 | DDIA_TX3- | O | Lane 3 (-) |
| 4 | DDIA_TX3+ | O | Lane 3 (+) |
| 5 | GND | ||
| 6 | DDIA_TX2- | O | Lane 2 (-) |
| 7 | DDIA_TX2+ | O | Lane 2 (+) |
| 8 | GND | ||
| 9 | DDIA_TX1- | O | Lane 1 (-) |
| 10 | DDIA_TX1+ | O | Lane 1 (+) |
| 11 | GND | ||
| 12 | DDIA_TX0- | O | Lane 0 (-) |
| 13 | DDIA_TX0+ | O | Lane 0 (+) |
| 14 | GND | ||
| 15 | DDIA_AUX+ | O | Auxiliary channel (+) |
| 16 | DDIA_AUX- | O | Auxiliary channel (-) |
| 17 | GND | ||
| 18 | LCD_VCC | LCD Power Supplies | |
| 19 | LCD_VCC | LCD Power Supplies | |
| 20 | LCD_VCC | LCD Power Supplies | |
| 21 | LCD_VCC | LCD Power Supplies | |
| 22 | Selftest | O | Default Grounding |
| 23 | GND | ||
| 24 | GND | ||
| 25 | GND | ||
| 26 | GND | ||
| 27 | HPD | I | Plug Detection |
| 28 | GND | ||
| 29 | GND | ||
| 30 | GND | ||
| 31 | GND | ||
| 32 | BL_EN | O | Backlight enable |
| 33 | BL_PWM | O | Backlight PWM dimming |
| 34 | NC | ||
| 35 | NC | ||
| 36 | BL_PWR | Backlight Power Supplies | |
| 37 | BL_PWR | Backlight Power Supplies | |
| 38 | BL_PWR | Backlight Power Supplies | |
| 39 | BL_PWR | Backlight Power Supplies | |
| 40 | NC |
- LCD_VCC: +3.3V
- BL_PWR: Same as LattePanda Mu input voltage
- Selftest: Factory test pin, ground by default
Touch
Clamshell 6P 0.5mm FFC/FPC Connector
| Number | Name | Type | Description |
|---|---|---|---|
| 1 | I2C0_SCL | O | I2C Bus |
| 2 | I2C0_SDA | I/O | I2C Bus |
| 3 | GND | ||
| 4 | TOUCH_RST# | O | Touch panel reset |
| 5 | TOUCH_INT | I | Touch event interrupt |
| 6 | +3.3V | Touch panel power |
MIPI CSI-2
Clamshell 22P 0.5mm FFC/FPC Connector
| Number | Name | Type | Description |
|---|---|---|---|
| 1 | GND | ||
| 2 | CSI_B_D0- | I | MIPI Data Lane 0 |
| 3 | CSI_B_D0+ | I | MIPI Data Lane 0 |
| 4 | GND | ||
| 5 | CSI_B_D1- | I | MIPI Data Lane 1 |
| 6 | CSI_B_D1+ | I | MIPI Data Lane 1 |
| 7 | GND | ||
| 8 | CSI_B_CK- | I | MIPI Clock |
| 9 | CSI_B_CK+ | I | MIPI Clock |
| 10 | GND | ||
| 11 | CSI_B_D2- | I | MIPI Data Lane 2 |
| 12 | CSI_B_D2+ | I | MIPI Data Lane 2 |
| 13 | GND | ||
| 14 | CSI_B_D3- | I | MIPI Data Lane 3 |
| 15 | CSI_B_D3+ | I | MIPI Data Lane 3 |
| 16 | GND | ||
| 17 | CAM_RST | O | Camera reset |
| 18 | CAM_MCLK | O | Camera main clock |
| 19 | GND | ||
| 20 | I2C1_SCL | O | I2C bus |
| 21 | I2C1_SDA | I/O | I2C bus |
| 22 | +3.3V | Camera power |
- CAM_RST: SoC GPP_A21
- CAM_MCLK: SoC GPP_D4
SODIMM
DDR4 SODIMM pin table is too long, so I put it in a separate csv file.
⚠️ Note:
Due to the large number of functionally multiplexing pins, you should check the BIOS functionality documentation before starting your design. Do not design directly from the pin definition documentation here.